Home - Knowledge - Details

What is the condensation reflux and condenser safety valve problem analysis!

Condenser is one of the main products of our company, so we must have a little understanding and understanding of it, otherwise we can not be familiar with it.
1. Can we see the condenser directly on the refrigerator?
On the refrigerator, we can not see the condenser directly, so on this question, the answer is no. Because the condenser on the refrigerator is on the back or side of the refrigerator. And some are also integrated into the refrigerator. In structure, it is relatively simple, mainly according to the hot plate and pipeline these two components.

2. What is the condensation reflux on the condenser?
Condensation reflux on the condenser means that when there is a volatile liquid reactant, in order to avoid the loss of the reactant and realize the full utilization of the raw material, a condensation reflux device will be installed on the generating device, so that the material will be condensed from gas to liquid and backflow and collection for reuse.

3. If the safety valve on the condenser jumps, what should be done?
If the safety valve on the condenser jumps, then the treatment and solution measures depend on whether there is overpressure or whether the safety valve is overdue. Because there are clear regulations and requirements for the safety valve, it is required to check at least once a year. If it is not an overpressure problem, it may be that the valve setting pressure is not accurate, and then it needs to be re-checked.

These problems are all knowledge points for condenser website products.

Send Inquiry

You Might Also Like