Home -

Knowledge

  • 22

    Apr-2023

    Condenser installation requirements and precautions

    The points for attention when installing the condenser are as follows: ① When connecting the condenser pipe joint, it is necessary to distinguish where is the inlet and where is the outlet. The entran

  • 22

    Apr-2023

    The function and working principle of automobile air conditioning condenser

    Automobile air conditioning condenser is a part of the refrigeration system, belongs to a kind of heat exchanger, can turn gas or steam into liquid, the heat of the refrigerant in the tube to the air

  • 22

    Apr-2023

    The role of condensers in automobiles

    The function of the condenser on the car is to transform the high temperature and high pressure gaseous refrigerant sent by the compressor into liquid refrigerant, and the refrigerant changes its stat

  • 11

    Apr-2023

    What is a parallel flow heat exchanger and what are its characteristics?

    The parallel flow condenser is mainly composed of porous flat tube and corrugated shutter fin. The two ends have a flow collector, which can be divided into multiple parallel flow and unit parallel fl

  • 08

    Apr-2023

    What's the use of refrigerator evaporator

    1. Refrigerator evaporator is an important heat exchange component of refrigerator refrigeration system. It is the equipment of cold output in refrigeration device, mainly for heat absorption. 2, the

  • 08

    Apr-2023

    What kind of refrigerator evaporator is good

    May be a lot of people do not know what is the refrigerator evaporator, in fact, it is an important heat exchange part of the refrigerator refrigeration system, mainly for heat absorption, there are m

  • 08

    Apr-2023

    What is the difference between copper fin evaporator and aluminum fin evapora...

    Copper is more resistant to corrosion and conducts heat better than aluminum. Unit volume weight, copper is heavier than aluminum, but the cost, copper is much more expensive than aluminum. In general

  • 08

    Apr-2023

    Finned evaporator structure

    Series products: aluminum tube aluminum fin evaporator Main raw material: aluminum tube (or aluminum tube) aluminum foil Structure: aluminum tube and aluminum tube through the fin, expansion and tight

  • 08

    Apr-2023

    Technical requirements for aluminum tubes for refrigerator fin evaporators

    1. Aluminum tube size: according to the design requirements, choose the appropriate aluminum tube diameter and wall thickness. 2. Aluminum pipe processing: aluminum pipe to be cut, bending, forming an

  • 21

    Mar-2023

    Structural features of finned condenser

    Structural features of finned condenser: 1. The unique cross-pipe method can ensure uniform liquid distribution in the windward area of the entire coil. 2. The fins and copper tubes are mechanically e

  • 21

    Mar-2023

    Troubleshooting method for air conditioner condenser

    1. For common leaks in condensers: From the surface inspection, the signs of leaks are mostly oil stains in the condenser, and the leaks between the fins are mostly cracks or blisters in the coil. It

  • 20

    Mar-2023

    Common faults of refrigerator evaporator

    1. Improper amount of injected refrigerant After replacing the evaporator, the amount of refrigerant used may be different from the original. The judging method at this time is that the return pipe ou