How to confirm the installation position of condenser

Now more and more businesses to build cold storage, want to find a professional cold storage construction business is also very inappropriate, professional condenser installation is very important, different condensers are different. Various types of condensers should be arranged near the oil separator and liquid reservoir according to the cold storage process. The installation height of the condenser must ensure that its liquid flows into the reservoir according to the flow condition. Pressure gauge and safety valve should be installed on the condenser. Different types of condensers have different layout requirements, and today we will understand it in detail with Xiaobian.

1. Horizontal condenser
The horizontal condenser shall be arranged in the cold storage equipment room and shall not be located in the open air. In order to save the floor space to buy age, the upper and lower layers are arranged with the liquid reservoir. At one end of the condenser, there should be room for cleaning and replacing the pipe (about 1.5 times the length of the condenser). There should be room above both ends of the condenser to lift the end cover. When there are many units, an operating platform can be set up. To ensure smooth liquid discharge of the condenser, the outlet should be at least 300mm higher than the cut-off of the outlet pipe.

2, pouring condenser
The poured condenser must be placed in an open, ventilated place outside the equipment room or on the roof of the equipment room. The front of the row pipe should be perpendicular to the prevailing summer wind direction in the area. In areas with high wind, the condenser should be surrounded by a sheet water baffle.

3, vertical condenser
The vertical condenser should be placed outside the equipment room, and avoid direct sunlight. There should be a 3m distance between the pool wall of the condenser and the wall of the equipment to reduce the damage to the wall caused by the external splashing of the cooling water. Vertical condensers usually use a bottom pool of water as a base. There should be room above the condenser for cleaning and replacing the tubes. In order to facilitate operation, a steel structure operating platform should be provided.