Evaporator clogging treatment

Stop the machine for inspection
First, you need to shut down and cut off the power of the evaporator to ensure safety. Carefully check the various parts of the evaporator to determine the specific location and cause of the blockage.

Cleaning method
Choose the right cleaning method according to the blockage situation:

Physical cleaning: For minor blockage, a high-pressure water gun can be used to flush the inside of the evaporator to wash away the blockage. This method is simple and straightforward, but may not completely remove all scale and impurities.

Chemical cleaning: If the physical cleaning effect is not good, you can consider using chemical cleaning agents. Select a cleaning agent specifically for industrial evaporator scaling treatment, such as Sennas scaling agent, which can effectively soften and remove the dirt generated by the evaporator during the treatment of high-salt wastewater, and there is basically no corrosion loss on the evaporation equipment, and no side reactions occur. When using, follow the instructions of the cleaning agent to operate, pay attention to protect other parts of the evaporator from damage.

Mechanical cleaning: In some cases, more powerful mechanical means may be required to remove the blockage. For example, tools such as scrapers and brushes can be used to clean the inside of the evaporator. This method is suitable for more stubborn clogging situations, but it needs to be handled with care to avoid damaging the equipment.