Home - Knowledge - Details

Evaporator clogging factor

Identify the cause of blockage

 

 

 

Scale and sediment 01

Long-term continuous operation will lead to scale and sediment inside the evaporator, such as impurities, salts and hard substances, which will lead to blockage of the flow channel.

Bubble problem 02

Bubbles in the evaporator may cause the cooling liquid flow to decrease or even interrupt, reduce the heat transfer coefficient, and even cause sudden blockage in serious cases.

The liquid viscosity is too high 03

during the evaporation process, the liquid concentration is too high or the viscosity is too high, which may cause the internal flow channel of the evaporator to narrow or block.

Foreign matter entry 04

such as fibers, sediment, salt particles, etc., may enter the evaporator and cause blockage.

Unreasonable design 05

The design of the evaporator is unreasonable, such as the height of the evaporation chamber is not enough, the evaporation strength is too large, etc., which may also lead to blockage.

 

 

 

Send Inquiry

You Might Also Like