What are the common condenser failures?
Leave a message
Leakage, blockage, poor heat dissipation, etc.
Needless to say, there was sludge, where it leaked.
Condenser clogging failures are generally uncommon. In some vehicles with older service life, due to the increasing impurities in the air conditioning system, impurities may accumulate at the corner of the condenser, thus forming a damping hole similar to the throttle hole tube, which obstructs the flow of refrigerant.
Judging this kind of problem is very simple, that is, according to the flow direction of the condenser, from top to bottom to measure the temperature of each layer of the condenser; The temperature of the normal condenser gradually decreases from high to low, and there should be no obvious temperature change. If we find a significant temperature change between the two layers, there should be a blockage inside, causing throttling.
For the heat dissipation effect of the condenser, it is not necessarily the condenser itself that is dirty, it is likely that the water tank is dirty, resulting in poor heat dissipation. On our common vehicles, the condenser is usually arranged in front of the water tank. In many cases, empty and dirty air will accumulate between the condenser and the water tank, especially in the front of the water tank, there will be a large number of flocculent blockage, affecting the heat dissipation airflow. As a result, the cooling of the condenser is not good, and the cooling effect of the air conditioning system is not good.







