The condenser should be cleaned frequently when used
Leave a message
The condenser needs to be cleaned in time because most of the water contains calcium, magnesium ions and acid carbonate in the cooling water process of the condenser. When the cooling water flows through the metal surface, carbonate is formed. In addition, the oxygen dissolved in the cooling water will also cause metal corrosion, forming rust. Due to the generation of rust and scale, the heat transfer effect of condenser decreases. In serious cases, cooling water has to be sprayed outside the shell, and serious scaling will block the pipe, so that the heat transfer effect will lose its effect. The research data show that scale deposits have a great impact on heat transfer loss, and the increase of sediment will lead to an increase in energy costs. Even a thin layer of scale will increase the operating cost of the scale part of the equipment by more than 40. Keeping the cooling channel free of mineral deposits can improve efficiency, save energy, extend the service life of the equipment, and save production time and costs.
What is the cleaning method of the condenser? For a long time, traditional cleaning methods such as mechanical methods (scraping, brushing), high pressure water, chemical cleaning (pickling), etc., have many problems when cleaning equipment: Can not completely remove the scale and other sediments, acid corrosion on the equipment to form loopholes, residual acid on the material to produce secondary corrosion or scale corrosion, and eventually lead to the replacement of equipment, in addition, cleaning waste liquid toxic, need a lot of funds for wastewater treatment.







