Difference between air-cooled condenser and shell and tube condenser
Leave a message
First, the working principle
Shell and tube condenser:
The working medium (such as steam or refrigerant) enters the shell of the condenser.
The condensing medium forms a film on the outer wall of the tube and transfers heat to the tube by conducting heat.
The cooling medium (such as water or air) flows through the inside of the tube to exchange heat with the condensing medium on the outer wall of the tube.
After cooling, the condensing medium condenses into a liquid and then exits the system through the housing.
Air cooled condenser:
The heat released by the refrigerant is carried away by the air, which can be natural convection or forced flow by a fan.
The refrigerant is cooled in a condenser, changing from a gas to a liquid while releasing heat.
Air-cooled condenser is suitable for freon refrigeration equipment in the water supply is inconvenient or difficult occasions, the water consumption is very little.
Second, structural characteristics
Shell and tube condenser:
The structure is relatively complex, consisting of shell, tube bundle, tube plate, tube box and so on.
Can be divided into vertical and horizontal two, vertical covers a small area but the flow resistance is large, horizontal flow resistance is small but occupies a large space.
Air cooled condenser:
The structure is relatively simple and does not require cooling water and drainage pipes.
Air cooling by fan only, easy to install and use.
Suitable for low power equipment or air cooling environment.
Third. Application scenarios
Shell and tube condenser:
Usually suitable for high temperature and high pressure conditions, widely used in chemical, electric power, metallurgy and other industries.
Air cooled condenser:
It is suitable for small systems with small cooling load and limited space, such as small air conditioners, freezers and refrigerators.
It is especially suitable for places where water resources are limited or where water supply is inconvenient.
Fourth, performance and efficiency
Shell and tube condenser:
In a stable water supply system, its performance is more superior.
Air cooled condenser:
Simple structure, easy installation, and no additional water source, has advantages in specific occasions.







