Home - Knowledge - Details

Cooling process of condenser

Condenser is the full name of surface cooler. The principle is to let the heat medium or refrigerant or refrigerant flow through the inner cavity of the metal pipe, and the air to be treated flows through the outer wall of the metal pipe for heat exchange to achieve the purpose of heating or cooling the air. The heat and humidity exchange of the condenser is carried out under the action of the temperature difference between the main air and the boundary layer air close to the outer surface of the heat exchanger and the partial pressure difference of water vapor.

In the process of dehumidification cooling, because there is not only temperature difference between the boundary layer air and the main air, but also the partial pressure difference of water vapor, there is not only sensible heat exchange through the surface of the heat exchanger, but also latent heat exchange accompanied by wet exchange. Therefore, the condenser under wet conditions has greater heat exchange capacity than that under dry conditions. In other words, for the same condenser, when the dry bulb temperature and water temperature of the treated air remain unchanged, the higher the wet bulb temperature of the air, the greater the cooling and dehumidification capacity of the condenser.

Send Inquiry

You Might Also Like