Commissioning of air cooled evaporator in display cabinet
Leave a message
debug
Power check
Ensure that the power supply of the display cabinet is connected and the voltage is stable.
Check whether the power indicator of the evaporator is on to ensure that the power supply is normal.
01
Refrigeration system inspection
Start the display cabinet and observe whether the compressor, condenser, evaporator and other refrigeration equipment are running normally.
Use a thermometer to measure the temperature of the evaporator inlet and outlet to ensure that the temperature difference is within the normal range.
02
Pressure check
Use a pressure gauge to check the pressure of the refrigeration system to ensure that the high and low pressure are within the normal range.
Observe the change in the reading of the pressure gauge and determine whether the system has leakage or blockage.
03
Wind speed and volume check
Check the speed and air volume of the evaporator fan to ensure smooth air flow and no blockage.
Adjust the wind speed controller to keep the wind speed in an appropriate state to ensure the cooling effect and product quality.
04
Humidity control
Adjust the humidity in the display cabinet according to the needs of the product. Under normal circumstances, the humidity should be maintained between 60% and 80%.
Use the humidity controller for precise adjustment, and pay attention to the change of the hygrometer.
05







