What are the differences between heat pump evaporator and condenser
Leave a message
Heat pump evaporator is a very important part of the four major parts of refrigeration, low temperature condensation "liquid" body through the evaporator, and the outside air for heat exchange, "gas" heat absorption, to achieve the effect of refrigeration. The heat pump condenser is a part of the refrigeration system, which belongs to a heat exchanger, which can convert the gas or vapor into a liquid, and transfer the heat in the tube to the air near the tube in a very fast way. The working process of the condenser is a heat release process, so the temperature of the condenser is high.
The difference between heat pump evaporator and condenser:
The condenser is a kind of exchanger that causes the "gaseous" refrigerant to release heat and condense into a "liquid". Evaporator is the reverse process of 'condensation', which is the process of vaporization of the exposed surface of the liquid. The evaporation process is generally endothermic.
One end of the heat pump evaporator is connected to the inlet of the compression pump (suction port), the outlet of the compression pump (exhaust port) is connected to one end of the condenser, the other end is connected to the capillary tube (the inner hole is very small), and the other end of the capillary tube is connected to the evaporator to form a complete hot and cold circulation loop. Inject appropriate amount of freon into the hot and cold circulation pipe and start the compression pump. The gas freon is inhaled by the compression pump, compressed into high temperature and high pressure gas, and then discharged to the condenser, when it flows through the condenser, it dissipates heat to the surrounding air and condenses into a liquid, and is sent to the evaporator by the throttling of the capillary, when the evaporated freon absorbs a lot of heat around it and evaporates into the gas. The continuous refrigeration cycle is completed by doing it again and again.







