The multi-effect continuous evaporator can be functional modified

Continuous evaporative crystallizers are expensive mechanical equipment. If the production requirements can not be used after purchase, or the existing continuous evaporative crystallizers are not suitable for the new mode requirements when the enterprise changes the production mode, it is unrealistic to abandon the existing continuous evaporative crystallizers. In this case, the continuous evaporation crystallizer can be reformed as follows
1. Improve the automation level of multi-effect continuous evaporator to realize CNC and linkage; .
2. Realize automatic control;
3. Make parts universal, serialized and standardized;
4. Transform the multi-effect continuous evaporator into a high-efficiency and special-purpose multi-effect continuous evaporator;
5, improve the reliability and maintainability of multi-effect continuous evaporator parts;
6. Retrofitting multi-effect continuous evaporator monitoring device;
7. Improve the lubrication and cooling system;
8. Improve the process performance of multi-effect continuous evaporator;
9. Improve safety, protection devices and environmental pollution systems;
10. Reduce raw material and energy consumption of multi-effect continuous evaporator;
The above is the introduction of the transformation of the continuous evaporation crystallizer. Of course, the transformation also needs a certain cost, but it is still very little compared with the purchase of a new continuous evaporation crystallizer. In order to improve the feasibility of renovation, comprehensive design and economic cost estimation should be carried out before construction.