Several reasons for the emergence of obstacles in fin evaporator
Leave a message
1. The water in the condenser does not enter the pool, but enters the evaporator. In this way, the vacuum degree in the evaporator will be weakened, and the content of concentrated alkali in the evaporator will be reduced, thus leading to the normal operation of the evaporator. Condensate water may also enter the vacuum pump, this time will appear because of the uneven cold and heat and then lead to the rupture of the vacuum pump. Therefore, if it is found that the condensate backflow must stop the work immediately to find out the cause and then restart. In addition, in the daily use of the condenser should often check whether there is scale, regular cleaning scale.
2. There is too much water in the condenser, and the alkali in the water will follow the steam into the heating chamber. After the steam condenses, the condensed water contains alkali. So in daily use, pay attention to not too much water, if there is a pipeline rupture to repair or replace in time.
3. If the evaporator is damaged and affects the vacuum degree or the temperature of condensed water is too high, it may lead to the low efficiency of the evaporator. At this time, the problem should be found out first and then solved.







