Home - Knowledge - Details

Finned coolers in industrial production

Finned cooler adopts advanced mechanical tube expansion and double flanged aluminum fin structure. The mechanical expansion makes the copper tube contact with the aluminum fin, which can promote the turbulent flow of the fluid, destroy the boundary layer and increase the heat transfer coefficient. This structural type, coupled with waterway travel, pipe distance, sheet distance design is reasonable, so that the heat exchanger has good heat transfer performance, small air resistance, compact structure, light weight and so on. It can be widely used in air conditioning, cooling, dehumidification, heating and other projects, is an ideal supporting product for fresh air units and air handling units, it can also be connected with the air pipe as cooling or heating alone. The heat exchanger specifications and varieties are complete to meet the needs of different working conditions and various combinations.

(1) The heat transfer efficiency is high, and the boundary layer is constantly broken due to the disturbance of the fin to the fluid, so it has a large heat transfer coefficient; At the same time, because the diaphragm and fin are very thin and have high thermal conductivity, the plate-fin heat exchanger can achieve high efficiency.

(2) Compact, because the plate-fin heat exchanger has an extended secondary surface, so that its specific surface area can reach 1000㎡/m3.

(3) Light, the reason is that compact and mostly made of aluminum alloy, and now steel, copper, composite materials have also been mass produced.

(4) Strong adaptability, plate-fin heat exchanger can be applied to: gas-gas, gas-liquid, liquid-liquid, heat transfer between various fluids and phase transformation heat with state change. Through the arrangement and combination of the runner, it can adapt to different heat exchange conditions such as countercurrent, cross-flow, multi-stream and multi-stream. Through the combination of series, parallel and series parallel between units, the heat transfer needs of large equipment can be met. In the industry, it can be shaped and mass-produced to reduce costs, and the interchangeability can be expanded through the combination of building blocks.

(5) The manufacturing process is strict and the process is complex.

(6) Easy to plug, not corrosion resistance, cleaning and maintenance is difficult, so it can only be used for heat exchange medium clean, no corrosion, not easy to scale, not easy to deposit, not easy to plug occasions.

Send Inquiry

You Might Also Like